Converter-based multi-frequency power transfer system for efficient energy packet transmission in the energy internet

The energy internet concept involves the transmission of energy in discrete packets, akin to the information internet's principle. The energy internet must adopt a decentralized configuration and enable bidirectional and simultaneous power transfer. This raises the problem of congestions during the energy packet dispatching process. To address potential congestion issues, we propose a three-phase multi-frequency power transfer system (MFPTS) where the positive-sequence fundamental frequency component is supplemented with the zero-sequence third and the negative-sequence fifth harmonic components. By using such signals with proper amplitudes, the harmonics are added to the voltage without changing the peak amplitude but increasing the rms value. To exert complete control over the different frequencies employed within the MFPTS, a decoupling method is necessary to separate these frequencies in the control system. This leads to creating three independent channels of power transfer by three frequencies without changing the existing infrastructure as these powers can be transferred within the same lines. This paper explores the feasibility of three-phase three-frequency power transfer by using three parallel power transfer channels, achieved through the utilization of three-phase grid-forming and grid-feeding converters. Using power converters provides the advantage of bidirectional power transfer and facilitates decentralization by serving as an interface between distributed power generation systems and the utility grid. These properties are essential for achieving optimal energy internet performance. The simulation and practical results prove that the proposed MFPTS could solve the energy packet dispatching congestion problem to have a reliable energy internet for the future.