Application of nano-urea in conventional flood-irrigated Boro rice in Bangladesh and nitrogen losses investigation

Bangladesh stands third in global rice production while complete modernization of rice production is not fully enforced. The boon of nano agriculture might circumvent the challenge of increasing the yield with minimal ecological damage. Nanofertilizer might be one of the solutions to address the problem of modern agriculture confronting environmental hazards owing to the excessive use of synthetic fertilizers by farmers in Bangladesh. We synthesized nanourea by chemical co-precipitation (CP) and hydrothermal (HT) methods in an attempt to develop environmentally friendly nanofertilizers. We characterized the nanourea and confirmed the functionalization of nanohydroxyapatite (nHAP) with urea by scanning transmission electron microscopy (STEM)/EDS mapping. The CP method produced particle dimensions of 45.62 nm for length and 14.16 nm for width. In comparison, the readings obtained through the HT method were around 74.69 nm and 20.44 nm for length and width, respectively. The field application of nanourea demonstrated impressive results, indicating a significant relationship between the particle size of nanourea and its impact on several agricultural factors. The grain yield using traditional synthetic fertilizer (urea) ranged from 6.47 to 6.52 t ha^-1 with a very low NUE of 35.8-36.34 %. Contrarily, the grain yield was found from 6.52 to 6.84 t ha^-1 and the obtained NUE ranged from 57.58 to 71.0 % using nanourea of the same concentration calibrated with traditional urea by two methods. Additionally, nanourea treatments having 25 % less nitrogen (N) provided higher total N (TN) in grain suggesting possible nutritional enrichment while checking the yield penalty and substantial increase in N use efficiency (NUE). However, further upscaling of this research on a field scale is necessary to confirm the findings.