Production of Low-Cost Adsorbents within a Circular Economy Approach: Use of Spruce Sawdust Pretreated with Desalination Brine to Adsorb Methylene Blue

A sustainable low-cost activated carbon substitute was produced based on pretreated lignocellulosic biomass, especially spruce sawdust. A harmful liquid waste, desalination brine, was used for the treatment of a solid wood industry waste, spruce sawdust. This approach is in the circular economy theory and aims at the decarbonization of the economy. Pretreated sawdust was tested as an adsorbent appropriate for the removal of a commonly used pollutant, methylene blue, from industrial wastewater. The adsorption capacity of the pretreated material was found to have increased four times compared to the untreated one in the case that the Freundlich equation was fitted to the isotherms' data, i.e., the one with the best fit to the isotherm's experimental data of the three isotherm models used herein. The treatment experimental conditions with desalination brine that gave maximum adsorption capacity correspond to a 1.97 combined severity factor in logarithmic form value. Moreover, a kinetic experiment was carried out with regard to the methylene blue adsorption process. The desalination brine-pretreated sawdust adsorption capacity increased approximately two times compared to the untreated one, in the case when the second-order kinetic equation was used, which had the best fit of the kinetic data of the three kinetic models used herein. In this case, the pretreatment experimental conditions that gave maximum adsorption capacity correspond to -1.049 combined severity factor in logarithmic form. Industrial scale applications can be based on the kinetic data findings, i.e., spruce sawdust optimal pretreatment conditions at 200 °C, for 25 min, with brine solution containing 98.12 g L^-1 NaCl, as they are related to a much shorter adsorption period compared to the isotherm data.