Discovery of white etching areas in high nitrogen bearing steel X30CrMoN15-1: A novel finding in rolling contact fatigue analysis

White etching areas (WEA) and white etching cracks (WEC) are frequently linked to premature bearing failure in conventional high carbon bearing steels like 100Cr6 (SAE 52100). In contrast, no WEA/WEC has yet been reported for the high nitrogen bearing steel X30CrMoN15-1 (SAE AMS 5898). Thus, the present study proves for the first time that X30CrMoN15-1 is also susceptible to develop WEA/WEC under rolling contact fatigue (RCF) when pre-charged with hydrogen. RCF tests conducted in parallel without hydrogen pre-charging resulted in RCF damage only, which identifies hydrogen as an active agent for WEA/WEC formation in X30CrMoN15-1. These findings correspond to the fact that hydrogen diffusion during RCF is often considered to cause or accelerate the formation of WEA/WEC. Additionally, it is observed that the M 2 (C, N) and M 23 C 6 precipitates of the martensitic microstructure of the X30CrMoN15-1 do not entirely decompose during the WEA formation process as observed for M 3 C precipitates in 100Cr6. In conclusion, the results for X30CrMoN15-1 strongly suggest that the formation of WEA is driven by a hydrogen-activated local severe plastic deformation process, which initiates continuous dynamic recrystallisation, leading to the characteristic nano-ferritic grains observed in WEA. Also, the highly stable and self-regenerating passive chromium-oxide layer of X30CrMoN15-1 mitigates the risk of WEA/WEC failure during typical RCF operation by hindering the formation and adsorption of ionic hydrogen. Hence, this study emphasises the importance of protecting the base material against hydrogen ingress to delay WEA/WEC formation. • White etching areas and cracks (WEA/WEC) under rolling contact fatigue in X30CrMoN15-1 have been proven for the first time. • Testing reveals that hydrogen is an active agent in WEA/WEC formation in X30CrMoN15-1. • Precipitates from X30CrMoN15-1, such as M 2 (C, N) and M 23 C 6 , are also found within the WEA.

Authors

Institutions

Publication Details

Journal
Wear
Published
2024-08-30
DOI
https://doi.org/10.1016/j.wear.2024.205556
Citations
3
Primary Topic
Hydrogen embrittlement and corrosion behaviors in metals
Type
article
Field-Weighted Citation Impact
0.52
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Discovery of white etching areas in high nitrogen bearing steel X30CrMoN15-1: A novel finding in rolling contact fatigue analysis

Joachim Mayer, Alexander Schwedt, Daniela Zander, Christoph Broeckmann et al.
3 citations
Wear
Hydrogen embrittlement and corrosion behaviors in metals
0.52
article

Discovery of white etching areas in high nitrogen bearing steel X30CrMoN15-1: A novel finding in rolling contact fatigue analysis

Joachim Mayer, Alexander Schwedt, Daniela Zander, Christoph Broeckmann, Florian Steinweg, Jun Wang, Adrian Mikitisin, Dheeraj Singh Chauhan, Thomas E. Weirich, S. Richter, Jinli Zhang
article en
3 citations

Abstract

White etching areas (WEA) and white etching cracks (WEC) are frequently linked to premature bearing failure in conventional high carbon bearing steels like 100Cr6 (SAE 52100). In contrast, no WEA/WEC has yet been reported for the high nitrogen bearing steel X30CrMoN15-1 (SAE AMS 5898). Thus, the present study proves for the first time that X30CrMoN15-1 is also susceptible to develop WEA/WEC under rolling contact fatigue (RCF) when pre-charged with hydrogen. RCF tests conducted in parallel without hydrogen pre-charging resulted in RCF damage only, which identifies hydrogen as an active agent for WEA/WEC formation in X30CrMoN15-1. These findings correspond to the fact that hydrogen diffusion during RCF is often considered to cause or accelerate the formation of WEA/WEC. Additionally, it is observed that the M 2 (C, N) and M 23 C 6 precipitates of the martensitic microstructure of the X30CrMoN15-1 do not entirely decompose during the WEA formation process as observed for M 3 C precipitates in 100Cr6. In conclusion, the results for X30CrMoN15-1 strongly suggest that the formation of WEA is driven by a hydrogen-activated local severe plastic deformation process, which initiates continuous dynamic recrystallisation, leading to the characteristic nano-ferritic grains observed in WEA. Also, the highly stable and self-regenerating passive chromium-oxide layer of X30CrMoN15-1 mitigates the risk of WEA/WEC failure during typical RCF operation by hindering the formation and adsorption of ionic hydrogen. Hence, this study emphasises the importance of protecting the base material against hydrogen ingress to delay WEA/WEC formation. • White etching areas and cracks (WEA/WEC) under rolling contact fatigue in X30CrMoN15-1 have been proven for the first time. • Testing reveals that hydrogen is an active agent in WEA/WEC formation in X30CrMoN15-1. • Precipitates from X30CrMoN15-1, such as M 2 (C, N) and M 23 C 6 , are also found within the WEA.

WearVol. 558-559
RWTH Aachen University (DE)
Openalex Percentile: Top 45%
Hydrogen embrittlement and corrosion behaviors in metals
0.52
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.