Assessment of cantilevered curtain wall system supported by tension rods for an enclosed circular building

Curtain wall systems have undergone significant advancements to meet the evolving architectural requirements and achieve aesthetic appeal and functionality in buildings worldwide. These non-structural enclosures, typically constructed with lightweight materials like glass or metal panels, contribute to the visual appeal of high-rise structures while providing numerous benefits, such as ample natural light and unobstructed views. The current paper focuses on analyzing and designing a cantilevered curtain wall system supported by tension rods for the auditorium façade at a simulation centre. The curtain wall surrounds the entire primary structure of the building, which has a circular layout. The study uses numerical modeling with the Robot software to analyze stresses and deflections in the glass, tension rods, mullions, and transoms while considering a wind load of 1.6 kPa. According to the findings, tempered laminated glass that is 19.52 mm thick satisfies the Ultimate Limit States (ULS) and Serviceability Limit States (SLS). Under the limit states, the Technal system (FM169) reinforced with steel tubes can transfer the design loads. The steel framing system that supports the tension rods and transfers the load of the curtain wall to the main structure is likewise considered safe. The structural integrity of the curtain wall is ensured by the prescribed requirements for the connections, which include a 5 mm fillet weld with a throat thickness of 3.5 mm, 20 mm diameter tension rod (Kin long system), and 8 mm thick MS plates with channel brackets. This research expands the practical application of cantilevered curtain wall systems of buildings with enclosed circular layouts.