Numerical investigation of MHD mixed convection in an octagonal heat exchanger containing hybrid nanofluid

Nowadays, the advancement of heat transmission for the heat exchanger device is an important field of research for many researchers. In this work, a numerical study has been conducted to investigate the thermal performance of a mixed convective flow through the octagonal heat exchanger covered by hybrid nanofluid (Cu-TiO₂-H₂O). A magnetic field has been introduced inside the cavity to investigate the mixed convective hydrodynamics heat flow characteristics. The nanofluid cores absorb/release energy to manage heat transmission by increasing or decreasing inside the cavity domain as the host fluid and dispersed hybrid nanofluid circulate within the cavity. After transforming the governing equations into a generalized, non-dimensional formulation, the finite element approach is utilized to solve the associated equations. Additionally, response surface methodology is also applied to test the responses of the associated factors. Heat transport was examined in relation to the effects of nanofluids fusion temperature, boundary wall properties, Reynolds number, Hartmann number and nanoparticle volume fractions. The outcomes of this study are analysed by measuring streamline profiles, isotherms, average Nusselt number, velocity profile, and 2D and 3D response surfaces of the computational domain. The underlying flow controlling parameters for instance Reynolds number (10 ≤ Re ≤ 200), Hartmann number (0 ≤ <i>Ha</i> ≤100), and nanoparticle volume fractions (0 ≤ ϕ ≤ 0.1), the influences have been considered. The findings also reveal that the thermal performance is being boosted due to augmentation of Re and ϕ, but reverse behavior is noticed for <i>Ha</i>. Furthermore, the response surfaces obtained from response surfaces methodology express that the Re and ϕ have shown positive influence, and <i>Ha</i> has shown negative influence on Nu_av. Utilizing a hybrid nanofluid of Cu-TiO₂-H₂O increases the heat transfer capacity of water to 25.75 %. Moreover, the findings could guide to design of a mixed convective heat exchanger for industrial purposes.