Technology of Manufacturing Hollow Soil-Cement Blocks

The author analyzed technological solutions for the production of blocks from soil cement. It is proposed to make soil cement blocks from portland cement brand 400 in the amount of 20 % of the mass of soil and water. Experimental addition of fly ash to the solution in different amounts depending on the cement content. It is proposed to add ash removed from the Darnytsya thermal power plant, which was sifted through a 4 mm sieve, because the ash contains a significant amount of impurities. The content of inclusions from 1 to 4 mm was up to 40 %. It is proposed to make blocks from soil cement with the addition of fly ash with the aim of improving the thermotechnical properties. It is proposed to make soil-cement blocks with two voids. To ensure high-quality compaction of products in forms, the moisture content of the content for most soils should be within 14–23 %. The maximum force that the sample can withstand was taken as a destructive load. It was decided that the use of fly ash as part of the mixture in the production of soil cement gives a positive effect. With an increase in the period of exposure of samples in water to 90 days, the average compressive strength of soil cement samples without additives and with the addition of the appropriate percentage of fly ash increases.