Rheological Behavior of SiO2 Ceramic Slurry in Stereolithography and Its Prediction Model Based on POA-DELM

Ceramic slurry is the raw material used in stereolithography, and its performance determines the printing quality. Rheological behavior, one of the most important physical factors in stereolithography, is critical in ceramic printing, significantly affecting the flow, spreading, and printing processes. The rheological behavior of SiO₂ slurry used in stereolithography technology is investigated in the current research using different powder diameters and temperatures. The results present the apparent non-Newtonian behavior. The yielding characteristics occur in all cases. For single-powder cases, the viscosity decreases when the powder diameter is increased. When the nano-sized and micro-sized powders are mixed in different proportions, a more significant proportion of micron-sized powders will decrease the viscosity. With an increase in the nano-sized powders, the slurry exhibits the shear thinning behavior; otherwise, the shear thickening behavior is observed. Thus, the prediction model is built based on the use of the pelican optimization algorithm-deep extreme learning machine (POA-DELM), and the model in then compared with the fitted and traditional models to validate the effectiveness of the method. A more accurate viscosity prediction model will contribute to better fluid dynamic simulation in future work.