Development of Optical Sensors Based on Neutral Red Absorbance for Real-Time pH Measurements

Measuring pH with an optical sensor requires the immobilization of a chemical recognition phase on a solid surface. Neutral red (NR), an acid base indicator was used to develop two different optical probe configurations. The chemistry of aryl diazonium salts was chosen for the elaboration of this chemical phase, as it enables strong covalent bonds to be established on the surface of metallized glass or metallic surfaces. It also allows the formation of a thick film required to obtain an exploitable spectral response. The surfaces of interest (metallized optical fiber and 316 L stainless-steel mirror) are modelized by flat surfaces (metallized glass plates and 316 L stainless-steel plates). The analytical characterizations carried out (IR, XPS, UV-Visible, and profilometry) show that NR was covalently grafted onto the model surfaces as well as on the surfaces of interest. The supports grafted with NR to develop optical pH probes exhibit spectral changes, particularly the values of pKa, the pH range, and the isosbestic point wavelength. The experimental results show that the optical probe can be used for pH measurements between 4 and 8.