Effect of Heating Rate on Microstructure and Corrosion Resistance of Quenched and Tempered 8620 Low Carbon Alloy Steel

In the process of heat treatment of 8620 low alloy steel, the heating rate is a critical parameter that must be carefully controlled to achieve the desired combination of microstructural features, mechanical properties, and corrosion resistance while simultaneously ensuring process efficiency and cost-effectiveness. This study investigates, for the first time, the microstructural evolution and electrochemical properties of 8620 steel under identical quenching and tempering heat treatment routes with slow-rate (SR) and fast-rate (FR) heating rates. Microstructural analysis revealed martensitic phases for SR, while FR exhibited a dual-phase microstructure containing ferrite. Upon tempering, for both samples, the martensite transformed into tempered martensite, with tempered (Temp) FR exhibiting around 50% smaller ferrite grains. Mechanical testing indicated that SR had 17% higher hardness than FR, although hardness decreased after tempering by 22% (SR) and 17% (FR). All electrochemical tests indicated that the as-quenched SR exhibited significantly superior corrosion resistance than FR. For instance, the polarization resistance of SR was 440 Ω higher than that of the FR samples. Tempering resulted in a considerable decrease in corrosion resistance for Temp SR, whereas Temp FR improved. Electrochemical characterization revealed Temp FR displayed close-to-ideal capacitive behavior and low double-layer capacitance, indicating enhanced overall corrosion resistance.