Investigating the Influence Mechanism of Different Shielding Gas Types on Arc Characteristics and Weld Quality in TA2 Laser–Arc Hybrid Welding

The effective welding of a 6 mm thick TA2 pure titanium medium-thickness plate was achieved by laser–arc hybrid welding (LAHW) with helium–argon mixed shielding gas. Conducted research on the influence of helium–argon mixed shielding gas on plasma and arc characteristics during welding, and its further impact on the microstructure, internal porosity defects, tensile properties, and corrosion resistance of welded joints was explored. The study demonstrated that under the shielding gas with 75% helium, the arc width narrowed significantly from 6.96 mm to 2.61 mm, achieving a 63% reduction, which enhanced the concentration of arc heat flux density. Achieved a well-formed weld with no surface spatter and significantly reduced the internal porosity rate from 3.02% to 0.47%, which is an 84% decrease. Tensile fractures are located in the base material, all exhibiting plastic failure. The corrosion resistance of the welded joint initially increased and then decreased with the increase of helium content in the shielding gas, peaking at 75% helium content.