Large eddy simulation of turbulent transport and thermal enhancement in a steam-cooled ribbed channel

Pulsating flow, as an active heat transfer enhancement technique, is expected to further improve thermal performance. To demonstrate the potential value of pulsating flow in blade cooling, a numerical investigation is conducted on the flow and heat transfer in a steam-cooled ribbed channel under steady and pulsating inflow at Re = 12000. LES, based on OpenFOAM-8, is employed and precursor simulation method is used to generate fully developed turbulent inflow. Three operating conditions, steady inflow ( St F = 0), low frequency pulsation ( St F = 0.02) and medium frequency pulsation ( St F = 0.08), are studied. The features under steady inflow condition ( St F = 0) are firstly discussed, indicating that, due to the entry effect, the ribbed channel can be divided into two regions with different vortex motion behaviors. The ejections induced by vortex evolution enhance turbulent and energy transport between the sidewall and mainstream. Two cases of pulsating inflow are then carried out, finding that stronger ejections appear and low heat transfer area is significantly improved. Corresponding to low frequency pulsation ( St F = 0.02) and medium frequency pulsation ( St F = 0.08), the Nusselt number has an increase of 3.511 % and 14.242 %, respectively, and friction factor has a rise of 3.934 % and 8.253 %, compared with steady inflow. The thermal performance factor is increased by 11.262 % at St F = 0.08, indicating better cooling performance than the rise of 2.188 % at St F = 0.02. It is suggested that pulsating flow with medium frequency pulsation has positive performance in a steam-cooled ribbed channel.