Charcoal in Anaerobic Digestion: Part 1—Characterisation of Charcoal

Biochar (BC) is often used as an additive in anaerobic digestion (AD) to increase yield and/or to stabilise the process when the manure content is increased. Unfortunately, BC is rarely described in detail in terms of its raw material sources, production processes, and structural, physical and chemical properties to allow correlation with its effects on AD. It is an open question whether microorganisms from AD can penetrate into different biochar pore types, depending on their wood origin. In this paper, we describe the preparation (temperatures, treatment times, yields) and characterisation shrinkage, density, pore sizes, pore size distribution, specific surface area, ash, volatiles, fixed carbon, elemental composition, polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs), benzene, toluene, ethyl-toluene, xylene (BTEX) and volatile halogenated hydrocarbons (VHH) of BC cubes of Scots pine (Pinus sylvestris) and common beech (Fagus sylvatica) powder made from this BC in addition to commercial charcoal powder. The pore size distribution determined by mercury porosimetry differs from that determined by 3D-reflected light microscopy. After incubating BC cubes in AD, the cubes were mechanically cleaned and cut into two pieces. Microorganisms were detected inside the cubes by fluorescence microscopy. Particle size and wood source determine the influence of BC on AD.