Validation of Experimental Data for the Application of the Magnesium Alloy “Elektron 43”

The behaviour of a structural component, such as the spreader installed on an aeroplane passenger seat made of the magnesium alloy Elektron® 43, is evaluated under a variety of load conditions. The purpose of this research project is to considerably reduce weight by employing the new alloy while keeping the strength and ductility necessary to meet the dynamic standards for both the 16 g forward and 14 g downward tests. A comprehensive campaign of static and dynamic testing on coupons was conducted to characterise the mechanical behaviour of the E43 magnesium alloy, from quasi-static to dynamic loading, and across a wide range of deformation rates. The elastic–plastic and strain rate sensitive material model of E43 is then calibrated using an FEA approach and LS-DYNA software, utilising stress–strain curves and properties determined from standardised experimental tensile and compression trials at varied strain rates. Finally, this material model was used to perform a finite element structural study of a major component of an aeroplane seat built using Elektron® 43 under typical in-flight stresses.