Leakage monitoring of carbon dioxide injection well string using distributed optical fiber sensor

Whether the oil and gas fields in the Carbon Capture, Utilization, and Storage (CCUS) project use underground storage or energy supplementation to enhance oil recovery, they must be injected or monitored through the wellbore. Thus, the foundation and requirement for the safety of carbon dioxide (CO 2 ) storage is the wellbore's integrity. When CO 2 is dissolved in water, carbonic acid is created, and this acid strongly corrodes underground pipes. Therefore, the integrity issue with CO 2 injection wells is more noticeable than with other wellbores. An annular pressure during gas injection is the primary symptom of gas injection string leakage in CO 2 injection wells. This study aims to provide real-time pipe string monitoring using a distributed optical fiber temperature sensing system (DTS) and a distributed optical fiber acoustic sensing system (DAS). Variations in temperature and vibration are caused by annulus pressure relief or gas injection. Optical fiber logging, in contrast to traditional logging, has better performance indicators for optical fiber sensing apparatus. To adapt to complex wellbore conditions, it is necessary to enhance the temperature accuracy of DTS and the sensitivity and signal-to-noise ratio of DAS in CO 2 drive injection wells based on the features of the gas injection string. To differentiate the leakage signal from the regular fluid flow signal, the energy calculation in the frequency band is done for DAS based on noise reduction, and the signal processing in the frequency band is done by the spectrum characteristics of the CO 2 wellbore signal. The translation invariant wavelet algorithm is the primary denoising method for DTS, overcoming the shortcomings of traditional wavelet threshold algorithms such as excessive smoothing and the pseudo-Gibbs phenomenon. Furthermore, the depth correction during the optical cable lowering process is also examined in this paper. A CO 2 gas injection well field experiment was conducted using this technology. A 1671m well was dug, and 1631m of optical cable were installed in the tubing. The tubing leakage position was successfully identified through gas injection, annulus pressure relief, and a comparison of DAS and DTS data. The field results demonstrate the accuracy with which the gas injection string integrity can be accurately monitored in real-time using distributed optical fiber sensing technology for CO 2 injection wells.