Characterization of Architecture Bounding Surfaces in Fluvial Tight Sandstone Reservoirs and Their Influence on Remaining Gas: A Case Study from the Suzhong Block, Sulige Gas Field

The H8 and S1 reservoirs in the lower Shihezi Formation and Shanxi Formation of the central block in the Sulige Gas Field are typical fluvial tight sandstone reservoirs. Due to frequent river channel migrations during deposition, the reservoirs exhibit complex spatial structures with developed intra-sand mudstone interlayers. As the field has entered the middle and late stages of development, the distribution of remaining gas is intricately controlled by these interlayers, necessitating research on their distribution to understand the remaining gas patterns and types for effective extraction enhancement. However, the thinness of interlayers presents a challenge for precise prediction. Addressing this, this study delineates different interlayer types and their origins, applies reservoir architecture theory, and utilizes bounding surfaces characterization, planar and sectional distribution studies, unit scale analysis, horizontal well data, and quantitative characterization methods to investigate the internal reservoir architecture bounding surfaces. The study finely portrays the interlayer distribution, analyzes the control of reservoir architecture bounding surfaces on remaining gas, and establishes a multi-tiered reservoir architecture model in the study area. Numerical simulation of the gas reservoir clarifies the types of remaining gas enrichment. This study also identifies and quantitatively characterizes the 5–3 level architecture bounding surfaces within the sandbody, categorizing the remaining gas into bounding surfaces-controlled, well-network uncontrolled, and single-layer unperforated types, proposing targeted enhancement measures for each type. Based on the findings, four vertical wells and three horizontal wells were deployed, improving the well network density to three wells per square kilometer. The first completed horizontal well encountered an effective drilling rate of 61.7%, marking significant implications for the exploitation and recovery enhancement of similar tight sandstone gas reservoirs.

Authors

Institutions

Publication Details

Journal
Energies
Published
2024-08-26
DOI
https://doi.org/10.3390/en17174262
Citations
1
Primary Topic
Hydrocarbon exploration and reservoir analysis
Type
article
Field-Weighted Citation Impact
0.27
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Characterization of Architecture Bounding Surfaces in Fluvial Tight Sandstone Reservoirs and Their Influence on Remaining Gas: A Case Study from the Suzhong Block, Sulige Gas Field

Yuqi Bai, Jinbu Li, Qi Chen, Yuming Liu et al.
1 citations
Energies
Hydrocarbon exploration and reservoir analysis
0.27
article

Characterization of Architecture Bounding Surfaces in Fluvial Tight Sandstone Reservoirs and Their Influence on Remaining Gas: A Case Study from the Suzhong Block, Sulige Gas Field

Yuqi Bai, Jinbu Li, Qi Chen, Yuming Liu, Bingbing Zhang, Fuping Li, Lei Jin, Xinqiang Liu
article en
1 citations

Abstract

The H8 and S1 reservoirs in the lower Shihezi Formation and Shanxi Formation of the central block in the Sulige Gas Field are typical fluvial tight sandstone reservoirs. Due to frequent river channel migrations during deposition, the reservoirs exhibit complex spatial structures with developed intra-sand mudstone interlayers. As the field has entered the middle and late stages of development, the distribution of remaining gas is intricately controlled by these interlayers, necessitating research on their distribution to understand the remaining gas patterns and types for effective extraction enhancement. However, the thinness of interlayers presents a challenge for precise prediction. Addressing this, this study delineates different interlayer types and their origins, applies reservoir architecture theory, and utilizes bounding surfaces characterization, planar and sectional distribution studies, unit scale analysis, horizontal well data, and quantitative characterization methods to investigate the internal reservoir architecture bounding surfaces. The study finely portrays the interlayer distribution, analyzes the control of reservoir architecture bounding surfaces on remaining gas, and establishes a multi-tiered reservoir architecture model in the study area. Numerical simulation of the gas reservoir clarifies the types of remaining gas enrichment. This study also identifies and quantitatively characterizes the 5–3 level architecture bounding surfaces within the sandbody, categorizing the remaining gas into bounding surfaces-controlled, well-network uncontrolled, and single-layer unperforated types, proposing targeted enhancement measures for each type. Based on the findings, four vertical wells and three horizontal wells were deployed, improving the well network density to three wells per square kilometer. The first completed horizontal well encountered an effective drilling rate of 61.7%, marking significant implications for the exploitation and recovery enhancement of similar tight sandstone gas reservoirs.

EnergiesVol. 17(17)
China University of Petroleum, Beijing (CN), Research Institute of Petroleum Exploration and Development (CN)
Sustainable cities and communities
Openalex Percentile: Top 51%
Hydrocarbon exploration and reservoir analysis
0.27
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.