Characterization of fatigue behavior of 3D printed pneumatic fluidic elastomer actuators

Abstract Soft robots have gained significant interest due to their high flexibility and adaptability to various working conditions. Recent advancements in engineering and innovative materials have enabled the design and production of sophisticated soft robotic systems with enhanced capabilities. This study aims to evaluate the fatigue behavior of bellow-type pneumatic soft actuators fabricated through fused filament fabrication (FFF) using thermoplastic polyurethane (TPU), compared to silicone rubber cast actuators. The actuators were equipped with resistive flex sensors to monitor bending motion, and fatigue tests were performed with cycles of inflation and deflation until failure. Results showed that 3D printed TPU actuators could withstand a significant number of cycles before failure, with an average of 6410 cycles at 3 bar pressure, compared to 3439 cycles at 1 bar pressure for the silicone actuators. The study identified a set of fabrication parameters that positively affect the durability of TPU actuators, providing valuable insights for replicating these results. Additionally, the study established a plausible range of utilization for 3D-printed FFF actuators in terms of the number of cycles they can endure, offering critical data for engineers and designers to make informed decisions about the design and application of these actuators in various practical scenarios. The findings demonstrate the potential of FFF for producing durable, long-lasting pneumatic soft actuators.