Assembled Wood-Polyester Fabric-Hydrogel Janus Evaporator for Sustainable Seawater Desalination

Solar-driven interfacial evaporation technology is a novel and efficient desalination process that helps alleviate the global shortage of freshwater resources. We developed a Janus evaporator assembled from cotton hydrogel, hydrophilic polyester fabric (PF), and Hydrophobic Wood (PW). By doping graphene oxide and TiO₂ as light-absorbing materials within the hydrogel, we achieved a high absorptivity of over 90% across the entire solar spectrum. The hydrophilically modified PF, combined with the PW substrate, provided robust water transport and reduced thermal losses. Subsequent optical path simulations using TracePro74 software verified that the sawtooth light-trapping design of the wood substrate increased multiple light reflections and absorption (compared to a flat structure), enhancing light absorption capabilities. The sawtooth interface also enlarged the evaporation area, further boosting evaporation performance. The cleverly designed evaporator exhibited an evaporation rate of 1.722 kg m^-2 h^-1 and an efficiency of 83.1% under 1 sun irradiation. Additionally, after applying polydimethylsiloxane to the single surface of the photothermal hydrogel for low surface energy treatment, the resulting Janus structure demonstrated asymmetric wettability that prevented salt ions from accumulating on the irradiated interface. After 8 h of continuous evaporation in saline water (10 wt %), only slight salt crystallization occurred at the edges. The evaporator maintained long-term stability during a 15 day cyclic test, and the produced freshwater fully met the relevant drinking water standards. The components of the evaporator are characterized by simple fabrication, low cost, and eco-friendliness, offering significant application potential in the global context of energy conservation and emission reduction initiatives.