Evaluation of maximum power point tracking methods for a marine current energy converter

Abstract Marine current power is attracting more attention as a renewable energy option. Similar to wind power, marine current power often requires a maximum power point tracking (MPPT) method to optimize power extraction from the free‐flowing water. Research into MPPT methods for marine current power remains limited. Therefore, this paper presents a comprehensive investigation of MPPT methods for marine current power, building upon similar research in wind power. Three methods, namely the optimal tip speed ratio (OTSR), optimal torque (OT), and two variants of the perturb and observe (P&O) method, are explored. Using a simulation model developed for a specific marine current energy converter, where hydrodynamic calculations are coupled with electrical simulations, the study demonstrates that the OTSR method achieves MPPT with a comparably fast convergence time. After a change in water speed, the OTSR method achieves optimal operation within two turbine rotations. Additionally, the P&O methods are shown to achieve MPPT, albeit with a significantly longer convergence time. However, the P&O methods can be more convenient since no model of the system is required, and no water speed measurements are necessary. The proposed implementation of the OT method underperforms but positions the system close to the optimal operational point.