Meteotsunamis Generated by Thunderstorms

Abstract South‐west Australia has been identified as a global hotspot for the occurrence of meteotsunamis. In this study, a numerical hydrodynamic model (Regional Ocean Modelling System) was configured to investigate the generation of meteotsunamis through propagating thunderstorms. A range of simulations were performed using realistic and synthetic atmospheric forcing to establish the sensitivity of meteotsunami wave heights and waveforms along different parts of the coast to variations in the propagation speed and bandwidths of propagating pressure jumps associated with the thunderstorms. When a pressure jump propagated from the north and north‐west quadrants with a speed ( U ) of 8–15 ms −1 , both the Proudman and Greenspan resonances were possible mechanisms for the generation of meteotsunamis. However, the response changed for different bandwidths of the propagating pressure jump and resulted in different meteotsunami waveforms at the coast. When U > 15 ms −1 , long waves were amplified initially through shoaling at the shelf slope, with Proudman resonance enhancing the wave heights at corresponding resonant depths on the shelf, and then propagated as free waves on the continental shelf. The waves were further amplified at the coast through refraction and shoaling effects and resulted in an elevation wave at the coast. Numerical simulations also indicated that edge waves can also be excited near the coast when the incoming free wave wavelengths were equal to or half the edge wave wavelength. The study provides observational and numerical evidence to suggest that the bandwidth of propagating air pressure jumps plays a major role in meteotsunami generation and their waveforms.