Mechanical degradation of Longmaxi shale exposed to water-based fluids and supercritical carbon dioxide

Mechanical alterations in shale formations due to exposure to water-based fracturing fluids and supercritical carbon dioxide (ScCO2) significantly affect the performance of shale gas exploration and CO2 geo-sequestration. In this study, a hydrothermal (HT) reaction system was set up to treat Longmaxi shale samples of varying mineralogies (carbonate-, clay-, and quartz-rich) with different fluids, i.e. deionized (DI) water, 2% potassium chloride (KCl) solution, and ScCO2 under HT conditions expected in shale formation. Statistical micro-indentation was conducted to characterize the mechanical property alterations caused by the shale-fluid interactions. An in situ morphological and mineralogical identification technique that combines scanning electron microscopy (SEM) and backscattered electron (BSE) imaging with energy-dispersive X-ray spectroscopy (EDS) was used to analyze the microstructural and mineralogical changes of the treated shale samples. Results show no apparent changes in the Young’s modulus, E, and hardness, H, after treatment with DI water under room temperature (20 °C) and atmospheric pressure for 7 d. In contrast, E and H were decreased by 31.2% and 37.5% at elevated temperature (80 °C) and pressure (8 MPa), respectively. The addition of 2% KCl into DI water mitigated degradation of the mechanical properties. Quartz-rich shale specimens are the least sensitive to the water-based fracturing fluids, followed by the clay-rich and carbonate-rich shale formations. Based on in situ morphological and mineralogical identification, the primary factors for the mechanical degradation induced by water-based fluids include carbonate dissolution, clay swelling, and pyrite oxidation. Slight increases in the measured E and H and compression of porous clay aggregates were observed after treatment with ScCO2. The major factor contributing to the mechanical changes resulting from the exposure to scCO2 appears to be the competition between swelling caused by adsorption and compression of shale matrix.

Authors

Institutions

Publication Details

Journal
Journal of Rock Mechanics and Geotechnical Engineering
Published
2024-08-23
DOI
https://doi.org/10.1016/j.jrmge.2024.08.009
Citations
8
Primary Topic
Hydraulic Fracturing and Reservoir Analysis
Type
article
Field-Weighted Citation Impact
1.70

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Mechanical degradation of Longmaxi shale exposed to water-based fluids and supercritical carbon dioxide

Jay N. Meegoda, Thibaut Divoux, Andrew J. Whittle, Liming Hu et al.
8 citations
Journal of Rock Mechanics and Geotechnical Engineering
Hydraulic Fracturing and Reservoir Analysis
1.70
article

Mechanical degradation of Longmaxi shale exposed to water-based fluids and supercritical carbon dioxide

Jay N. Meegoda, Thibaut Divoux, Andrew J. Whittle, Liming Hu, Jianting Du
article en
8 citations

Abstract

Mechanical alterations in shale formations due to exposure to water-based fracturing fluids and supercritical carbon dioxide (ScCO2) significantly affect the performance of shale gas exploration and CO2 geo-sequestration. In this study, a hydrothermal (HT) reaction system was set up to treat Longmaxi shale samples of varying mineralogies (carbonate-, clay-, and quartz-rich) with different fluids, i.e. deionized (DI) water, 2% potassium chloride (KCl) solution, and ScCO2 under HT conditions expected in shale formation. Statistical micro-indentation was conducted to characterize the mechanical property alterations caused by the shale-fluid interactions. An in situ morphological and mineralogical identification technique that combines scanning electron microscopy (SEM) and backscattered electron (BSE) imaging with energy-dispersive X-ray spectroscopy (EDS) was used to analyze the microstructural and mineralogical changes of the treated shale samples. Results show no apparent changes in the Young’s modulus, E, and hardness, H, after treatment with DI water under room temperature (20 °C) and atmospheric pressure for 7 d. In contrast, E and H were decreased by 31.2% and 37.5% at elevated temperature (80 °C) and pressure (8 MPa), respectively. The addition of 2% KCl into DI water mitigated degradation of the mechanical properties. Quartz-rich shale specimens are the least sensitive to the water-based fracturing fluids, followed by the clay-rich and carbonate-rich shale formations. Based on in situ morphological and mineralogical identification, the primary factors for the mechanical degradation induced by water-based fluids include carbonate dissolution, clay swelling, and pyrite oxidation. Slight increases in the measured E and H and compression of porous clay aggregates were observed after treatment with ScCO2. The major factor contributing to the mechanical changes resulting from the exposure to scCO2 appears to be the competition between swelling caused by adsorption and compression of shale matrix.

Journal of Rock Mechanics and Geotechnical EngineeringVol. 17(6)
New Jersey Institute of Technology (US), Centre National de la Recherche Scientifique (FR), University of Macau (MO), Laboratoire de Physique de l'ENS de Lyon (FR), Massachusetts Institute of Technology (US), City University of Macau (MO), Tsinghua University (CN)
National Natural Science Foundation of China, Tsinghua University, Universidade de Macau, State Key Laboratory of Hydroscience and Engineering
Clean water and sanitation
Openalex Percentile: Top 18%
Hydraulic Fracturing and Reservoir Analysis
1.70
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.