Removal of heavy metals from mine water using a hybrid electrocoagulation-ceramic membrane filtration process

Mining operations must account for increasingly stringent wastewater discharge limits for various contaminants, such as heavy metals and suspended solids. In the treatment of metal-bearing wastes, electrochemical processes, including electrocoagulation (EC), are gaining popularity. At large scales, EC processes can be hindered by considerable amounts of flocculants and by sedimentation tank sizes required to properly operate. This work sought to address these concerns by evaluating EC in mine water treatment using a pilot system coupled with ceramic membrane microfiltration (MF) and ultrafiltration (UF). The use of MF and UF after EC allows for the removal of suspended solids without needing a flocculation-sedimentation process. EC evaluation was performed using field samples of mine water from a North American concentrator. Under optimal conditions, EC removed over 95 % of Cr, Co, Cu, Fe, Mn, Ni, Pb, Ti and Zn from the mine water. Effluent from EC was used as feed in MF and UF processes with ceramic membranes. The tested membranes rejected 100 % of suspended solids from the EC effluent. Permeate from the membranes was free of solids and possessed turbidities of 0.05–0.15 NTU. Filtrate from the hybrid process satisfied environmental regulations for heavy metal concentrations, offering new opportunities for reuse or discharge. The hybrid process applied in this work can thus be used in mining operations to safely discharge their water, and/or to increase their water recirculation due to environmental concerns and water shortage. • Electrocoagulation-ceramic membrane filtration process was used to treat mine water. • Electrocoagulation was capable of removing > 95 % of heavy metals from the mine water. • Permeate from ceramic MF/UF had no suspended solids and turbidity of 0.05-0.15 NTU. • Metal concentrations in permeate met discharge limits imposed on Canadian mines. • Hybrid process reduces footprint and offers new opportunities for water reuse/discharge.

Authors

Institutions

Publication Details

Journal
Desalination and Water Treatment
Published
2024-08-23
DOI
https://doi.org/10.1016/j.dwt.2024.100730
Citations
19
Primary Topic
Mine drainage and remediation techniques
Type
article
Field-Weighted Citation Impact
4.76

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Removal of heavy metals from mine water using a hybrid electrocoagulation-ceramic membrane filtration process

Konstantin Volchek, Saviz Mortazavi, Lucie Morin, Charbel Atallah et al.
19 citations
Desalination and Water Treatment
Mine drainage and remediation techniques
4.76
article

Removal of heavy metals from mine water using a hybrid electrocoagulation-ceramic membrane filtration process

Konstantin Volchek, Saviz Mortazavi, Lucie Morin, Charbel Atallah, Sanaz Mosadeghsedghi, Seyedeh Laleh Dashtban Kenari, Matthew Hudder, Ihsen Ben Salah
article en
19 citations

Abstract

Mining operations must account for increasingly stringent wastewater discharge limits for various contaminants, such as heavy metals and suspended solids. In the treatment of metal-bearing wastes, electrochemical processes, including electrocoagulation (EC), are gaining popularity. At large scales, EC processes can be hindered by considerable amounts of flocculants and by sedimentation tank sizes required to properly operate. This work sought to address these concerns by evaluating EC in mine water treatment using a pilot system coupled with ceramic membrane microfiltration (MF) and ultrafiltration (UF). The use of MF and UF after EC allows for the removal of suspended solids without needing a flocculation-sedimentation process. EC evaluation was performed using field samples of mine water from a North American concentrator. Under optimal conditions, EC removed over 95 % of Cr, Co, Cu, Fe, Mn, Ni, Pb, Ti and Zn from the mine water. Effluent from EC was used as feed in MF and UF processes with ceramic membranes. The tested membranes rejected 100 % of suspended solids from the EC effluent. Permeate from the membranes was free of solids and possessed turbidities of 0.05–0.15 NTU. Filtrate from the hybrid process satisfied environmental regulations for heavy metal concentrations, offering new opportunities for reuse or discharge. The hybrid process applied in this work can thus be used in mining operations to safely discharge their water, and/or to increase their water recirculation due to environmental concerns and water shortage. • Electrocoagulation-ceramic membrane filtration process was used to treat mine water. • Electrocoagulation was capable of removing > 95 % of heavy metals from the mine water. • Permeate from ceramic MF/UF had no suspended solids and turbidity of 0.05-0.15 NTU. • Metal concentrations in permeate met discharge limits imposed on Canadian mines. • Hybrid process reduces footprint and offers new opportunities for water reuse/discharge.

Desalination and Water TreatmentVol. 320
Natural Resources Canada (CA), Q & T Research (CA)
Natural Resources Canada
Clean water and sanitation
Openalex Percentile: Top 5%
Mine drainage and remediation techniques
4.76
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.