Effect of static magnetic field on corrosion of X70 pipeline steel in dilute sodium bicarbonate solutions

This paper focuses on the effect of a 0.1 T static horizontal magnetic field on the corrosion of X70 pipeline steel in 0–0.05 mol/L sodium bicarbonate solutions. The weight loss data indicate that the magnetic field reduces the average corrosion rate during immersion within 48 h in all the test solutions. The magnetic field tends to increase the average corrosion rates for the immersion time of 72 h and 96 h. The magnetic field increases the proportion of magnetite in corrosion products formed on the specimen of immersion in 0.05 mol/L sodium bicarbonate solution for 168 h. The open-circuit potentials (OCP) are in the active zone of the E -pH diagram within 48 h immersion with 0 T and 0.1 T magnetic field. A 0.1 T magnetic field delays the process for the electrode to enter the passive zone of the E -pH diagram. The linear polarisation resistance (LPR) data shows that the resistance of the active zone with 0.1 T magnetic field is larger than that with 0 T. The electrochemical impedance results also indicate that the electrode is in an active state when the potential is below −700 mV SCE and in a passive state when the potential is above −200 mV SCE .