Bond line shear strength of structural wood adhesives at high temperatures up to wood carbonization – A classification approach

The European timber fire design code EN 1995-1-2 presently specifies that adhesives for timber construction products shall provide integrity throughout the intended fire exposure time, yet no test or requirement specifications are given. Contrary, in North America elevated temperature tests are mandatory and product standards for glued and cross laminated timber demand sufficient bond line shear strength up to 220 °C. This paper deals with block shear compression tests at ambient and elevated temperatures for development of a high temperature resistance classification system for structural wood adhesives. The investigations comprised 1200 specimens made from Norway spruce bonded with twelve brands from five adhesive families. Polycondensation (pcon) resins encompassed phenolic resorcinol formaldehyde, melamine urea formaldehyde and melamine formaldehyde adhesives. Polyaddition (padd) adhesives comprised five one-component polyurethanes and an emulsion polymer isocyanate. The focus was on the strength-temperature ( f v - T ) relationship of bonded and solid wood reference specimens at 180–270 °C. The pcon adhesives showed almost throughout a f v - T relationship close to solid wood up to 270 °C. Contrary, the padd adhesives revealed massive strength degradations vs. solid wood from 180 °C onwards. An adhesive test, evaluation and classification procedure with four classes T270 to T200 was derived. It is based on a comparison of the temperature-dependent shear strength decline in bonded samples vs. solid wood reference samples beyond 180 °C. Class T270 adhesives are proposed being suited for the linear charring model of EN 1995-1-2 as PRF adhesives without additional fire resistance testing of components deemed necessary today. • A novel wood adhesive high temperature classification was derived. • The bond line shear strength of adhesives was tested up to wood carbonization. • Most polycondensation adhesives performed like solid spruce wood up to 270 °C. • Polyaddition adhesives showed brand-wise very different temperature resistances. • The proposed adhesive classification procedure could replace component fire tests.