Micro/Nano Hierarchical Crater‐Like Structure Surface With Mechanical Durability and Low‐Adhesion for Anti‐Icing/Deicing

Superhydrophobic surfaces have attracted significant attention for their ability to prevent ice formation and facilitate deicing without requiring external energy. However, these surfaces are often vulnerable to damage from external forces, leading to functional failure due to poor mechanical stability, which limits their widespread use. Drawing inspiration from the hierarchical groove of rose petals and the micropapillae of lotus leaves, a simple laser-based method is proposed to create a superhydrophobic surface with a micro/nano hierarchical crater-like structure (HCLS). To enhance the surface, boiling water treatment is applied to induce dense nanostructures, resulting in an optimal contact angle (CA) of 162° and a desirable sliding angle (SA) of 2.0°. The initial ice adhesion strength of HCLS is as low as 1.4 kPa and remains below 10 kPa even after 300 cm sandpaper abrasion. Furthermore, the HCLS demonstrates excellent mechanical durability, maintaining its performance under conditions that simulate the continuous impact of water and sand in extreme weather. This approach offers an innovative design concept that has the potential to advance the development of anti-icing and deicing surfaces for future aircraft.