Detection Method of Stator Coating Quality of Flat Wire Motor Based on Improved YOLOv8s

The stator of a flat wire motor is the core component of new energy vehicles. However, detecting quality defects in the coating process in real-time is a challenge. Moreover, the number of defects is large, and the pixels of a single defect are very few, which make it difficult to distinguish the defect features and make accurate detection more difficult. To solve this problem, this article proposes the YOLOv8s-DFJA network. The network is based on YOLOv8s, which uses DSFI-HEAD to replace the original detection head, realizing task alignment. It enhances joint features between the classification task and localization task and improves the ability of network detection. The LEFG module replaces the C2f module in the backbone of the YOLOv8s network that reduces the redundant parameters brought by the traditional BottleNeck structure. It also enhances the feature extraction and gradient flow ability to achieve the lightweight of the network. For this research, we produced our own dataset of stator coating quality regarding flat wire motors. Data augmentation technology (Gaussian noise, adjusting brightness, etc.) enriches the dataset, to a certain extent, which improves the robustness and generalization ability of YOLOv8s-DFJA. The experimental results show that in the performance of YOLOv8s-DFJA compared with YOLOv8s, the [email protected] index increased by 6.4%, the precision index increased by 1.1%, the recall index increased by 8.1%, the FPS index increased by 9.8FPS/s, and the parameters decreased by 3 Mb. Therefore, YOLOv8s-DFJA can be better realize the fast and accurate detection of the stator coating quality of flat wire motors.