Parameter Optimization and Test for the Pulse-Type Gas Explosion Subsoiler

To address the problem of large tractive resistance in traditional subsoiling methods, this paper designed a pulse-type gas explosion subsoiler, as well as an air-blown double-ended chisel type subsoiling shovel and a conduit. The mathematical equation of the influence of the structural parameters of the subsoiler on the groove profile is established. The EDEM 2022 software was used to simulate the subsoiling operation process. The soil disturbance law of the chisel subsoiler was analyzed by the change of soil particle velocity. The optimum value interval of quadratic regression orthogonal rotation combination test factors was determined by using the steepest climb test, with specific tillage resistance and filling power as evaluation indicators. Based on the Box–Behnken design test, a second-order regression model of response value and significance parameter was obtained, and an optimal combination was found by optimizing the significance parameter. The effects of subsoiling air pressure, pulse width and pulse interval on evaluation indicators were analyzed by the response surface method; the test results show that when the air pressure was 0.8 MPa, the pulse width was 0.17 s and the pulse interval was 0.12 s, and the specific tillage resistance was 0.4421 N/mm2 and the filling power was 18.5%; a comparative test between the pulse-type gas explosion subsoiler and a continuous gas explosion subsoiler was carried out, and the specific tillage resistance was reduced by 12.2% and the filling power was reduced by 10.5%; the comparative test shows that the pulse-type gas explosion subsoiler has smaller tractive resistance per unit area and smaller disturbance to soil. The research results provide a theoretical basis and reference for the optimization and improvement of gas explosion subsoilers.