Numerical Simulation of Fracture Propagation Induced by Water Injection in Tight Oil Reservoirs

Dynamic fracture propagation significantly affects water flooding efficiency in tight oil reservoirs. This phenomenon, where moderate fracture openings can enhance water flooding volume and alleviate injection challenges, has been underexplored in current literature. Understanding dynamic fracture behavior poses a challenge due to the difficulty in characterizing them within traditional reservoir numerical simulators. In this study, we propose a numerical simulation method that integrates the KGD dynamic fracture model with a two-phase flow model. This approach enables detailed exploration of dynamic fracture evolution in reservoir scenarios featuring one injector and one production well. Our findings reveal that fractures extend from the water injection well to the oil production well, exhibiting rapid initial growth followed by a slower rate. Fluctuations in fracture tip pressure correspond to cycles of opening and closure. We observe that cumulative oil production increases more rapidly when injection pressure exceeds the fracture opening pressure. However, this growth rate diminishes beyond a certain threshold, highlighting the critical role of injection parameters in dynamic fracture efficacy. Optimal water flooding performance is achieved when injecting water slightly above the fracture opening pressure. Furthermore, we compare water cut curves generated by conventional commercial simulators with our fracture propagation model. Our model’s water cut curve aligns better with on-site data, indicating improved historical fitting accuracy. In conclusion, our study underscores the importance of dynamic fractures in enhancing water flooding efficiency in tight oil reservoirs and presents a robust numerical simulation framework for better understanding and management of reservoir dynamics.