Analysis of micro-defect-induced cracking in the IPyC layer of TRISO particle with the XFEM

Purpose We use the extended finite element method (XFEM) to model the whole process of initiation and propagation of cracks in the inner dense pyrolytic carbon (IPyC) layer of tri-structural isotropic (TRISO) particle induced by the microdefect in an irradiation-induced thermomechanical coupling environment and study the effect of microdefect sizes on the propagation path. Design/methodology/approach The irradiation-induced thermal–mechanical coupling analysis is first conducted for the representative volume element (RVE) of the TRISO particle by using the conventional finite element method (CFEM) so that the stress distribution is obtained. The stress results are then restored for the enriched elements, and the simulation of crack initiation and propagation is eventually carried out by using the XFEM. Findings 1. As a crack initiates in the IPyC layer, it will terminate at the free edge of the RVE TRISO particle in the end. 2. The size of the microdefect has a significant impact on the propagation path. Originality/value The ceramic dispersion microencapsulated (CDM) fuel is a good accident-resistant fuel whose safe operation is crucial to the safety and reliability of the whole nuclear reactor. It is of great scientific significance and practical value to study the irradiation-induced thermomechanical coupling stress distribution and cracking behavior in the IPyC layer of TRISO particles for the CDM fuel. Crack initiation and propagation analysis is challengeable for this complex multi-layer structure. This can help understand the failure mechanism of TRISO particles and evaluate the operation safety of the reactor.