Optimizing transparent electrodes: Interplay of high purity SWCNTs network and a polymer

The discovery of transparent electrodes led to the development of optoelectronic devices such as touchscreens, infrared (IR) sensors, etc. Carbon nanotubes (CNTs) have been a potential replacement for ITO due to their exceptional properties, especially in the IR region. In this work, we present the development of a CNT-polymer composite thin film that exhibits outstanding transparency across visible and IR spectra prepared by layer-by-layer (LbL) technique. This approach ensures uniform integration and crosslinking of CNTs into lightweight matrices, and also represents a cost-effective method for producing transparent electrodes with remarkable properties. The produced films achieved a transparency above 80 % in the UV/VIS range and approximately 70 % in the mid-IR range. The sheet resistance of the fabricated thin films was measured at about 4 kΩ/sq, showing a tendency to decrease with the number of bilayers. In this work we have investigated electrical properties and transport mechanisms in more detail with computational analysis. Computational analysis was performed to better understand the electrical behavior of nanotube-polymer junctions in the interbundle structure. Based on all results, we propose that the transparent electrodes with 4 and 6 bilayers are the most optimal structures in terms of optical and electrical properties. • Optimization of SWCNT-polymer electrodes with high transparency in the UV/Vis and mid-IR range. • Simple, affordable layer-by-layer technique for the fabrication of SWCNT-polymer electrodes. • Computational analysis as a tool for more detailed investigation of electrical properties and transport mechanisms. • Proposed 4- and 6-bilayer structures as the best trade off as the best compromise between optical and electrical properties.