Effect of Cu content on the microstructure and properties of sintered Fe-0.8C-xCu antifriction materials

Abstract Ferrous antifriction materials (FAMs) play a crucial role in powder metallurgy. Previous studies have primarily focused on exploring the antifriction properties of Fe-C-Cu materials with low copper content (0–5 wt%), while there have been fewer studies on high copper content FAMs. In this study, to investigate the effect of Cu content on the microstructure and properties of sintered FAMs, Fe-0.8C-xCu (x = 5–25 wt%) materials were prepared by powder metallurgy method. The density, microstructure, mechanical performance, friction and wear properties of the samples were analyzed. The results demonstrated a significant change in the relative density, hardness, friction and wear properties of sintered Fe-0.8C-xCu samples with increasing Cu content. Particularly, the Fe-0.8C-15Cu samples exhibited outstanding properties, with a relative density of 77.8%, a hardness of 43 HRB, crushing strength of 380 MPa, an average friction coefficient of 0.21, and a wear rate of 1.36 × 10 −8 mm 3 N·mm −1 . The primary wear mechanisms of the Fe-0.8C-xCu specimens include abrasive wear, adhesion wear, chafing fatigue, pitting, and oxidation. This study aims to provide an experimental and theoretical basis for the development of ferrous antifriction materials suitable for heavy-load conditions.