Transient Synchronous Stability Analysis of Grid-Following Converter Considering Outer-Loop Control with Current Limiting

With the evolution of modern power systems, inverter-based resources have become increasingly prevalent. As critical energy conversion interfaces, grid-following converters exhibit dynamic performances, presenting challenges for system security and stability. This paper focuses on the transient synchronization stability of converters after disturbances, highlighting differences in mechanisms compared to synchronous generators. Although previous studies on the transient synchronization stability of converters have been conducted, they primarily concentrate on the dynamics of the phase-locked loop, with limited consideration of the effects of outer-loop control. This has created a cognitive bottleneck in understanding the transient synchronization mechanisms of converters. To address these challenges, this paper models a grid-following voltage source converter system, incorporating detailed converter control strategies and current-limiting control. The stability regions of the stable equilibrium point under various fault severities are first analyzed. Then, the impacts of outer-loop control, including PI control and current-limiting control, on transient synchronization are examined. The study systematically elucidates the influence of outer-loop control on the transient synchronization stability of converters. Finally, the validity of the proposed theory is confirmed through simulations conducted in PSCAD/EMTDC.