NaCl aerosol filtration over filter media with intrafiber porosity: can filtrate capacity be increased by wicking into this pore volume?

This paper investigates a novel fiber-based filter media wherein a NaCl filtrate is collected and reservoired not only onto the surfaces of the fibers and within their inter-fiber voidage but also within the internal porosity of high pore volume nanoporous fibers or vapor grown carbon nanofibers (VGCF) floc used to fabricate the media. This transport process is shown to occur through a NaCl dissolution into the water-filled nanopores of the fiber and a subsequent intra-fiber wicking phenomenon. The study further elucidates two distinct NaCl accommodation mechanisms which are uniquely available to filter media containing nanoporous intrafiber porosity: (1) wicking and capillary condensation of liquid NaCl aerosols directly into the intrafiber pores at high RH, and (2) dissolution of otherwise solid NaCl aerosols deposited onto fiber surfaces (at low RH) into the interior nanopores of the fiber because these pores (when hydrophilic) are saturated with water (even at low RH). To investigate these two mechanistic regimes, various media were fabricated possessing multiscale porosity in the form of: (i) embedded flocs of VGCFs (4.108 cm<sup>3</sup>gm<sup>-1</sup>pore volume), (ii) hydrophilic and high pore volume activated carbon fibers (ACFs, 0.950 cm<sup>3</sup>gm<sup>-1</sup>) and (iii) solid graphite fibers. These media were then comparatively evaluated toward NaCl aerosol filtration at different relative humidities. Pressure drop measurements versus filtrate accumulation and SEM-EDAX VGCF demonstrated the location and transport of NaCl into the intrafiber voidage. Media containing both VGCF floc and ACF accumulated 1200% more NaCl at low RH (and a specified pressure drop) than similar media prepared from non-porous graphite fibers, with an additional 315% increase from low to high RH. A Gibbs free energy driving force model is provided to illustrate the driving forces favoring water condensation into the nanopores and solid NaCl aerosol dissolution into the water phase. Filtration efficiency and quality factor assessments for the various media are also systematically evaluated to demonstrate the observed mechanistics.

Authors

Institutions

Publication Details

Journal
Nanotechnology
Published
2024-08-22
DOI
https://doi.org/10.1088/1361-6528/ad7140
Primary Topic
Aerosol Filtration and Electrostatic Precipitation
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

NaCl aerosol filtration over filter media with intrafiber porosity: can filtrate capacity be increased by wicking into this pore volume?

Amulya Poudyal, Bruce J. Tatarchuk
Nanotechnology
Aerosol Filtration and Electrostatic Precipitation
article

NaCl aerosol filtration over filter media with intrafiber porosity: can filtrate capacity be increased by wicking into this pore volume?

Amulya Poudyal, Bruce J. Tatarchuk
article en

Abstract

This paper investigates a novel fiber-based filter media wherein a NaCl filtrate is collected and reservoired not only onto the surfaces of the fibers and within their inter-fiber voidage but also within the internal porosity of high pore volume nanoporous fibers or vapor grown carbon nanofibers (VGCF) floc used to fabricate the media. This transport process is shown to occur through a NaCl dissolution into the water-filled nanopores of the fiber and a subsequent intra-fiber wicking phenomenon. The study further elucidates two distinct NaCl accommodation mechanisms which are uniquely available to filter media containing nanoporous intrafiber porosity: (1) wicking and capillary condensation of liquid NaCl aerosols directly into the intrafiber pores at high RH, and (2) dissolution of otherwise solid NaCl aerosols deposited onto fiber surfaces (at low RH) into the interior nanopores of the fiber because these pores (when hydrophilic) are saturated with water (even at low RH). To investigate these two mechanistic regimes, various media were fabricated possessing multiscale porosity in the form of: (i) embedded flocs of VGCFs (4.108 cm<sup>3</sup>gm<sup>-1</sup>pore volume), (ii) hydrophilic and high pore volume activated carbon fibers (ACFs, 0.950 cm<sup>3</sup>gm<sup>-1</sup>) and (iii) solid graphite fibers. These media were then comparatively evaluated toward NaCl aerosol filtration at different relative humidities. Pressure drop measurements versus filtrate accumulation and SEM-EDAX VGCF demonstrated the location and transport of NaCl into the intrafiber voidage. Media containing both VGCF floc and ACF accumulated 1200% more NaCl at low RH (and a specified pressure drop) than similar media prepared from non-porous graphite fibers, with an additional 315% increase from low to high RH. A Gibbs free energy driving force model is provided to illustrate the driving forces favoring water condensation into the nanopores and solid NaCl aerosol dissolution into the water phase. Filtration efficiency and quality factor assessments for the various media are also systematically evaluated to demonstrate the observed mechanistics.

NanotechnologyVol. 35(48)
Auburn University (US)
Office of Naval Research
Clean water and sanitation
Openalex Percentile: Top 89%
Aerosol Filtration and Electrostatic Precipitation
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.