Optical, thermal, and electrical characteristics of cashew gum/Polypyrrole/zinc oxide nanocomposites for next‐gen optoelectronics

Abstract In this electronic era, there is a demand to switch from conventional polymers to conducting biopolymers. We developed conducting biopolymer nanocomposites of cashew gum (CG) and polypyrrole (PPy) with zinc oxide (ZnO) nanofillers [CG/PPy/ZnO] via in‐situ oxidative polymerization using a sustainable solvent. These nanocomposites were characterized using Fourier‐transform infrared spectroscopy (FTIR), UV–visible spectroscopy, field emission scanning electron microscope (FE‐SEM), differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). The FTIR signal at 855 cm −1 confirms the successful inclusion of ZnO nanofillers into the biopolymer. UV–vis absorption of the blend nanocomposite increases with the nanoparticle doses. Among the various blend nanocomposites, the least bandgap energy was observed for 7 wt% ZnO loading. FE‐SEM revealed homogeneous dispersion of ZnO nanofillers in the CG/PPy blend at 7 wt% ZnO. TGA and DSC demonstrated that the CG/PPy/ZnO nanocomposites have better thermal stability and glass transition temperature than the pure polymer blend, indicating enhanced thermal properties. The CG/PPy/7 wt% ZnO showed the highest conductivity, 4.62 times greater than the pristine blend at 100 Hz. Dielectric constant, activation energy, AC conductivity and dielectric loss measurements demonstrated that the nanocomposites outperformed the pure polymer blend. Complex impedance analysis revealed increased impedance with rising temperature. Overall, CG/PPy/ZnO nanocomposites exhibit superior optical, morphological, thermal, electrical, and dielectric properties, making them promising for energy storage and optoelectronic applications. Highlights Ecofriendly synthesis of CG/PPy/ZnO nanocomposites Enhancement in optical, structural, and thermal properties of CG/PPy/ZnO Dielectric properties and temperature‐dependent AC conductivity are summarized. Blend nanocomposite shows higher AC conductivity and dielectric constant CG/PPy/ZnO nanocomposites are suitable for energy storage applications