Research on the Measurement and Estimation Method of Wheel Resistance on a Soil Runway

In view of the fact that there is no suitable measurement method for tire driving resistance during the operation of a transporter on soil pavement, this paper proposes a simple measurement and estimation method for driving resistance on a soil runway based on the Bekker settlement model. In this paper, using the driving resistance equation based on the Bekker model, a simplified equation of driving resistance related to mass is proposed. Using the principle of kinematics, a simple test device for driving resistance was developed, and the test data of the test device were used to determine the parameters of the driving resistance estimation equation of the road surface. The driving resistance of the wheel running state was tested by the simulated aircraft load loading vehicle through the mechanical sensor, and the consistency between the theoretical value and the actual value of the driving resistance value under 8T, 10T, and 12T loads was verified. This research shows that the test method and estimation method have low cost and good accuracy and are suitable for wide promotion. The results of this paper provide a new idea and method for estimating the driving resistance of a wheel when a transporter runs on a soil road and also provide a reference for designing the length of a soil runway.