Experimental investigation on energy absorption capability of 3D-printed lattice structures: Effect of strut orientation

This experimental study aimed to investigate the effect of strut orientation in various lattice structures that were created using 3D printers on the energy absorption capabilities of the structures. The experiment involved producing three different lattice structures, namely a cube lattice with vertical and horizontal struts, an octet structure with horizontal and 45˚ angled struts, and a body-centered-cubic (BCC) lattice structure with horizontal, vertical, and 45˚ angled struts using the FDM method. Nylon filament mixed with chopped carbon fiber was utilized as filament, and each lattice structure was designed to contain three units in the x and y directions and one and three units in the z-direction. The study conducted axial crushing tests on single-layer and three-layer lattices to determine the energy absorption capabilities of the various lattice structures. The octet lattice demonstrated the highest energy absorption in both single-layer and three-layer samples, making it the most efficient sample. In single-layer lattice samples, the cube and octet structures absorbed 77% and 94% more energy than the BCC structure, which absorbed only 12.8 J. However, the cube structure demonstrated the lowest energy absorption in three-layer samples. This was attributed to the buckling behavior seen in the strut of the lattice structure under axial load. The octet structure had the highest specific energy absorption value in both layers, making it the most energy-efficient sample.