Printed potentiometric, non-enzymatic sensors based on Zr(IV)-porphyrins for determination of lactate

The feasibility of using Zr-porphyrins as ionophores selective towards lactate ions was examined. Zr-tetraphenylporphyrin (Zr-TPP) and Zr-octaethylporphyrin (Zr-OEP) were tested in polyurethane membranes plasticized with dioctyl sebacate or o-nitrophenyl ether and containing cationic or anionic lipophilic sites, respectively. The best lactate response characteristics were registered for membrane plasticized with dioctyl sebacate and doped with Zr-TPP and cationic lipophilic sites. Classical electrodes with this membrane showed high selectivity towards lactate ions with a sensitivity of −76.6 mV dec −1 and linear lactate calibration range from 10 −4 M to 10 −1 M. Polymeric membranes containing Zr-TPP were then drop-casted on screen-printed transducers with electrodes made of graphene-containing paste. It was found that the potentiometric behavior of these miniature planar sensors is very similar to classical electrodes. In the next step, fully printed sensors, with both graphene electrodes and ion-selective polymeric membranes, were fabricated using aerosol jet printing. The sensitivity of these electrodes towards lactate was −79.01±0.39 mV dec −1 with a linear response range from 10 −3.5 M to 10 −1 M and a fast response to lactate concentration changes. The proposed electrode demonstrates a rare example of a potentiometric, non-enzymatic sensor for the determination of lactate ions, with the possibility of miniaturization and mass fabrication using printing methods. • Zr-porphyrins show high selectivity towards lactate ion in polyurethane membranes. • Both neutral carrier and charged carrier mechanism are possible for these ionophores. • Fully printed, planar sensors for lactate determination were developed. • A rare example of potentiometric, non-enzymatic lactate sensor was proposed.