Influence of post-thermal treatment on characteristics of polycrystalline hybrid halide perovskite nanoparticles thin film

A three-dimensional organic–inorganic hybrid halide perovskite (CH3NH3PbI2Br) nanoparticle film was synthesized using solution process in one step. Precursors’ stoichiometry was used to prepare methylammonium bromide and lead (II) bromide in dimethyl formamide. The synthesized CH3NH3PbI2Br solution was spin coated on cleaned ITO prepatterned glass substrate at 2000 rpm. In addition, the influence of post-thermal treatment on the deposited nanoparticles films was evaluated by studying the structural, optical and morphological properties using X-ray Diffraction (XRD), Fourier Transform Infrared (FTIR) spectrometry, UV–visible spectrophotometry, Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM). The average crystallite sizes were calculated to be ~ 8.0, ~ 9.4, ~ 11.3 and ~ 13.1 nm of as-prepared and annealed films at 400, 500 and 600 °C, respectively. Besides, the bandgaps of 2.22 eV, 1.96 eV, 1.89 eV and 1.63 eV were extrapolated for as-prepared and annealed films at 400 °C, 500 °C and 600 °C, respectively. From J–V curves, the Jsc values of 9.4, 10.6, 11.7 and 12.8 mAcm−2, FF values of 56.99%, 57.25%, 58.94% and 59.26% and PCE values of 2.99%, 3.49%, 3.96% and 4.39% were calculated for as-prepared and annealed CH3NH3PbI2Br films at 400 °C, 500 °C and 600 °C, respectively. The percentage enhancement values of 14.32%, 24.49% and 31.89% compared to as-prepared CH3NH3PbI2Br film. Hence, post-thermal treatment of organic–inorganic halide perovskite material improved its photoconversion efficiency without sacrificing its dimensionality.