Simultaneous removal of lead(II) and cadmium(II) from acidic wastewater by Fe-modified sludge biochar

In natural environments, heavy metal water pollution often involves simultaneous presence of various heavy metal ions (HMs), posing significant challenges for their removal. In this study, Fe-modified sludge biochar was synthesized via the co-precipitation method, and the effects of various environmental factors on simultaneously removing lead(II) and cadmium(II) by Fe@SBC were investigated. Batch adsorption experiments showed that Fe@SBC has a higher removal capacities for Pb(II) than for Cd(II) in both single or binary solutions. Increasing solution pH promoted the HMs removal on Fe@SBC. Coexisting divalent cations (Mg 2+ and Ca 2+ ) exhibited stronger inhibitory effects on HMs removal by Fe@SBC than monovalent cations (K + and Na + ). The presence of humic acid (HA) did not affect Pb(II) removal on Fe@SBC in either single or binary systems. In single systems, increasing HA concentration enhanced Cd(II) removing on Fe@SBC, while in binary systems, increasing HA concentrations inhibited the Cd(II) removal on Fe@SBC. The sorption of Pb(II) and Cd(II) on Fe@SBC followed the pseudo-second-order kinetic model and the Langmuir model. The removal mechanisms involved electrostatic interactions, complexation with O-containing group, and mineral dissolution-precipitation. After three regenerations, the adsorption capacity of Fe@SBC for Pb(II) and Cd(II) decreased by approximately 5–10 %. In summary, this environmentally friendly composite material has great potential for simultaneously remediating of Pb(II) and Cd(II).