The Mechanical Characteristics of Enhanced Bendable Concrete By Polyvinyl Alcohol Fibers

Abstract Engineered Cementitious Composites (ECC), which are alternatively referred to as Bendable Concrete, is a class of Ultra-ductile cementitious composites characterized by their remarkable ductility and polyvinyl alcohol fiber (PVA) fiber reinforcing. These composites are designed to regulate cracks width effectively. This study investigates the influence of matrix flowability, fiber mixing technique, and curing conditions on the mechanical characteristics of Bendable Concrete utilizing high-tenacity (PVA) fibers. This study examined the compressive strength of Bendable concrete, which ranged from 60 to 70 MPa, with a strain exceeding 3%. To regulate the flowability of the matrix, high range water reducing admixture (HRWRA) was added to a matrix with a weight ratio of silica fume was 10% by weight of cement, a weight ratio of water to cementitious material of 0.3, also polyvinyl alcohol acetate solution (PVAS). The primary parameter under investigation in this study is the changing volume fraction dose of (PVA) fiber, while the remaining materials of the combination were held constant. Four different (PVA) fiber percentages (0.5, 1.0, 1.5, and 2.0)% were adopted by volume of cement. Three (cubes, cylinders, and prisms) were fabricated and cast from each mixture and tested at the ages (7, 28, and 90) days for investigated (compressive, splitting tensile, and Modulus of Rupture) strength, respectively. The results of the tests demonstrated that the proportion of fiber substantially affects the strengths, where both the Compressive strength and Splitting tensile strength were increased with the increment of fiber content until 1% of (PVA) fiber . In comparison, the higher Modulus of Rupture was abtained at 2% (PVA) fiber.