Experimental studies on suppressing thermoacoustic oscillations by secondary gas injection in a premixed swirl combustor

Effects of secondary gas injection on flame shape and combustion stability of a premixed swirl methane/air flame were investigated experimentally. Without secondary gas injection, an attached M-shaped flame was observed with pressure oscillations up to a sound pressure level of 68 dB. The flame exhibited significant oscillations due to flame–vortex interactions induced by velocity fluctuations. The secondary methane or air was separately injected into the outer recirculation zone to suppress the flame oscillations at a volume flow rate of 0.5% of the primary flow rates. For lower primary air flow rates (Qair ≤ 60 L/min), both secondary methane and air injections were able to suppress the thermoacoustic instability and performed the sound pressure level reduction of 45 dB. Meanwhile, the flame transformed from an attached unstable M-shaped flame to a detached stable V-shaped flame. The secondary methane or air injection served to stabilize the flame and anchor its spatial heat release distribution by limiting the variation of flame shape in the outer recirculation zone, suppressing thermoacoustic oscillation. For higher primary air flow rates (Qair = 80 L/min), the secondary methane injection could reduce sound pressure levels to noise levels, while secondary air injection could not. The velocity disturbances and heat release fluctuations introduced by secondary methane injection could lead to a transformation in flame shape and achieve the suppression of thermoacoustic oscillation. However, the velocity disturbances induced by secondary air injection were insufficient to stabilize the flame.