A modified sidelobe blanking beamforming method for ultrasound plane wave imaging

In this paper, an ultrasound beamforming method for plane wave (PW) imaging based on modified sidelobe blanking (MSLB) is proposed to improve image resolution and contrast ratio (CR). In this framework, PWs from various angles were designed to create main and auxiliary beamformer signals. Specifically, the PW signals from all angles were first coherently combined to serve as the main beamformer output signals. To prevent excessive clutter and noise, output signals in the main beamformer were weighted by the generalized coherence factor. Subsequently, the PW signals were split into positive and negative angles to perform a subtraction, creating the auxiliary beamformer. Finally, signals in the main beamformer were compared with the signals in the auxiliary beamformer point by point to further eliminate the noises and clutters. Compared with the delay and sum, full width at half maximum of the MSLB for point targets was reduced by an average of 54.17% and 51.65% in simulations and experiments, respectively; and the corresponding CR was improved by 55.38% and 18.40% on average. The MSLB method provided better imaging quality in human carotid arteries. In conclusion, the proposed method can effectively improve image resolution and CR with low computational complexity.