Detection of Axial Locations of Control Rods Using Movable In-core Detectors

<ns3:p>Background Reactivity control in Pressurized Water Reactors (PWRs) relies on Rod Cluster Control Assemblies (RCCAs), or control rods (CRs), and boric acid diluted in primary circuit water. The control rods’ axial location inside the reactor core is typically provided by means of two redundant systems: the Rod Positioning Indicator (RPI) and the Rod Control System (RCS). Methods The current work focuses on the development of an additional method for the detection of control rod axial location inside the reactor core of a Pressurized Water Reactor (PWR) using the Advanced Flux Mapping System (AFMS) and its Movable In-core Detectors (MIDS). The paper presents the methodology employed and the results of the first validation campaigns. Results Two validation campaigns were carried out, targeting respectively equilibrium and non-equilibrium xenon axial distribution. The routine proved successful in identifying control rods’ axial insertion in different operating conditions including Flux Maps (FMs) acquired at 2%, 50% and 75% power. Conclusions The routine developed at Beznau Nuclear Power Plant will serve as an additional core monitoring tool to be employed in case of suspicious or faulty indication coming from the main control rod location methods. The developed method proved able to locate control rods’ axial insertion with few steps error, though there is room for potential improvements with regards to the uncertainty model currently implemented.</ns3:p>