A 121.7-dB DR and -109.0-dB THD+N Filterless Digital-Input Class-D Amplifier With an HV IDAC Using Tri-Level Unit Cells

The dynamic range (DR) of digital-input closed-loop class-D amplifiers (CDAs) is typically limited by the noise introduced by their resistive DAC (RDAC) or current-steering DAC (IDAC). It could be improved by using tri-level cells in the IDAC, but this has not yet been realized in high-voltage (HV) CDAs due to the large difference in the common-mode levels between the DAC and the CDA. This article describes an HV CDA directly driven by an HV IDAC. By using the same output common mode for the digital-to-analog converter (DAC) and CDA, the noise penalty associated with shifting the common mode is avoided. To address the distortion due to mismatch and intersymbol interference (ISI) in the IDAC, a transition-rate-balanced bidirectional real-time dynamic element matching (RTDEM) technique is also introduced. Fabricated in a 180-nm BCD process, the CDA prototype achieves a DR of 121.7 dB and a peak THD+N of -104.0 and -109.0 dB for 1- and 6-kHz inputs, respectively. It can deliver a maximum of 14 W into an 8- <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$\Omega $ </tex-math></inline-formula> load with a power efficiency of 90%.