Percutaneous Absorption of Fireground Contaminants: Naphthalene, Phenanthrene, and Benzo[a]pyrene in Porcine Skin in an Artificial Sweat Vehicle

Firefighters face significant risks of exposure to toxic chemicals, such as polycyclic aromatic hydrocarbons (PAHs), during fire suppression activities. PAHs have been found in the air, on the gear and equipment, and in biological samples such as the skin, breath, urine, and blood of firefighters after fire response. However, the extent to which exposure occurs via inhalation, dermal absorption, or ingestion is unclear. In this study, three PAHs, naphthalene, phenanthrene, and benzo[a]pyrene, were applied to porcine skin in vitro in an artificial sweat solution to better gauge firefighters' dermal exposures while mimicking their sweaty skin conditions using an artificial sweat dosing vehicle. Multiple absorption characteristics were calculated, including cumulative absorption, percent dose absorbed, diffusivity, flux, lag time, and permeability. The absorption of the PAHs was greatly influenced by their molecular weight and solubility in the artificial sweat solution. Naphthalene had the greatest dose absorption efficiency (35.0 ± 4.6% dose), followed by phenanthrene (6.8 ± 3.2% dose), and lastly, benzo[a]pyrene, which had the lowest absorption (0.03 ± 0.04% dose). The lag times followed a similar trend. All chemicals had a lag time of approximately 60 min or longer, suggesting that chemical concentrations on the skin may be reduced by immediate skin cleansing practices after fire exposure.