The Effect of Component Defects on the Performance of Perovskite Devices and the Low-Cost Preparation of High-Purity PbI2

The efficiency and reproducibility of perovskite solar cells (PSCs) are significantly influenced by the purity of lead iodide (PbI₂) in the raw materials used. Pb(OH)I has been identified as the primary impurity generated from PbI₂ in water-based synthesis. Consequently, a comprehensive investigation into the impact of Pb(OH)I impurities on film and device performance is essential. In this study, PbI₂, with varying stoichiometries, was synthesized to examine the effects of different Pb(OH)I levels on perovskite device performance. The characterization results revealed that even trace amounts of Pb(OH)I impede the formation of precursor prenucleation clusters. These impurities also increase the energy barrier of the α-phase and facilitate the transition of the intermediate phase to the δ-phase. These effects result in poor perovskite film morphology and sub-optimal photovoltaic device performance. To address these issues, a cost-effective method for preparing high-stoichiometry PbI₂ was developed. The formation of Pb(OH)I was effectively inhibited through several strategies: adjusting solution pH and temperature, modifying material addition order, simplifying the precipitation-recrystallization process, and introducing H₃PO₂ as an additive. These modifications enabled the one-step synthesis of high-purity PbI₂. PSCs prepared using this newly synthesized high-stoichiometry PbI₂ demonstrated photovoltaic performance comparable to those fabricated with commercial PbI₂ (purity ≥ 99.999%). Our novel method offers a cost-effective alternative for synthesizing high-stoichiometry PbI₂, thereby providing a viable option for the production of high-performance PSCs.