Underdetermined Blind Source Separation of Audio Signals for Group Reared Pigs Based on Sparse Component Analysis

In order to solve the problem of difficult separation of audio signals collected in pig environments, this study proposes an underdetermined blind source separation (UBSS) method based on sparsification theory. The audio signals obtained by mixing the audio signals of pigs in different states with different coefficients are taken as observation signals, and the mixing matrix is first estimated from the observation signals using the improved AP clustering method based on the "two-step method" of sparse component analysis (SCA), and then the audio signals of pigs are reconstructed by L1-paradigm separation. Five different types of pig audio are selected for experiments to explore the effects of duration and mixing matrix on the blind source separation algorithm by controlling the audio duration and mixing matrix, respectively. With three source signals and two observed signals, the reconstructed signal metrics corresponding to different durations and different mixing matrices perform well. The similarity coefficient is above 0.8, the average recovered signal-to-noise ratio is above 8 dB, and the normalized mean square error is below 0.02. The experimental results show that different audio durations and different mixing matrices have certain effects on the UBSS algorithm, so the recording duration and the spatial location of the recording device need to be considered in practical applications. Compared with the classical UBSS algorithm, the proposed algorithm outperforms the classical blind source separation algorithm in estimating the mixing matrix and separating the mixed audio, which improves the reconstruction quality.