Kinetics of spodumene calcination (α-LiAlSi2O6)

• A new isoconversional model is developed for the thermal treatment of α -spodumene. • The model predicts accurately the retention time of α -spodumene in kilns. • The initial dissociation-diffusion stage consumes 20 % of the total energy demand. • Slow recrystallisation of γ - to β -spodumene defines the processing time. • The conversion depends precipitously on the processing temperature. Kilns consume about half of the energy necessary to operate lithium refineries and their decarbonisation requires accurate modelling of the calcination of spodumene concentrates fed to the process. This contribution applies the isoconversional methodology to investigate the kinetic parameters of the transition of α- spodumene to its high-temperature polymorph of β- spodumene, using the heat flux measurements from the differential scanning calorimetry (DSC). The normalised energy demand ( α H ), presented as a function of temperature, characterises these measurements. The activation energy E α and the product of the reaction model f α and the frequency factor A α , ( fA ) α , depend on α H . As the process involves multi-step reactions, we deploy the Friedman differential method and the accurate flexible integral method of Vyazovkin to obtain the kinetic parameters. We also modify the method of Ortega to acquire additional estimates of E α and ( fA ) α and apply the rigid integral method of Starink for comparison. The Friedman, Vyazovkin and modified methods deliver the same estimates of the kinetic parameters within their error bands. The Starink method works surprisingly well for predicting the conversion time despite the inaccuracies in the derived values of E α and ( fA ) α . This comes to pass because of the compensation effect between these parameters. The activation energy declines rapidly from around 1000 kJ mol −1 at the commencement of the heat treatment to 668 kJ mol −1 at α H = 0.22, then, decreases gently to 577 kJ mol −1 at α H = 0.98, during successive recrystallisation events. Average uncertainties in these results amount to 13 kJ mol −1 . The frequency factors fall between 58.5 (±1.0) min −1 and 51.0 (±3.2) min −1 , as computed at α H = 0.23 and 0.98, respectively. The so-called false compensation analysis reveals that the first-order reaction model (in α H ) governs the energy demand for calcination for α H ≥ 0.23, but, initially, the transformation proceeds through the dissociation-diffusion regime that is not part of the established reaction models. This regime must not be ignored in modelling the calcination of α- spodumene, as it consumes around 20 % of energy required for the transformation reactions. The results reveal significant differences in the predictions of the treatment time, by more than two orders of magnitude, from the existing kinetic models, and explain the differences by the experimental conditions to collect the data for the models. The dissociation of Si-O bonds and diffusion of Si 4+ ions out of their tetrahedral cages govern the onset of the thermal treatment of α -spodumene and account for the elevated values of the activation energy in the dissociation-diffusion regime. The two recrystallisation events are limited by the multicomponent diffusion, especially Si 4+ , in partly crystallised structure. The recrystallisation of γ - to β -spodumene defines the required retention time of concentrate particles in the kiln, to maximise the effectiveness of the subsequent recovery of lithium from the treated material. Fitting E α and ln( fA ) α to polynomials allows a convenient integration of the model equation for making predictions under any heating program. The model forecasts well the transformation of particles of α- spodumene characterised by d 80 = 315 µm, studied in additional experiments, using the X-ray powder diffraction to quantify the conversion of α -spodumene. The predictions from the isoconversional model also concur well with other conversion measurements available in the literature, within the expected variability of different spodumene concentrates.

Authors

Institutions

Publication Details

Journal
Minerals Engineering
Published
2024-08-12
DOI
https://doi.org/10.1016/j.mineng.2024.108902
Citations
9
Primary Topic
Thermal and Kinetic Analysis
Type
article
Field-Weighted Citation Impact
1.05

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Kinetics of spodumene calcination (α-LiAlSi2O6)

Bogdan Z. Dlugogorski, Hans C. Oskierski, Arif A. Abdullah, Gamini Senanayake
9 citations
Minerals Engineering
Thermal and Kinetic Analysis
1.05
article

Kinetics of spodumene calcination (α-LiAlSi2O6)

Bogdan Z. Dlugogorski, Hans C. Oskierski, Arif A. Abdullah, Gamini Senanayake
article en
9 citations

Abstract

• A new isoconversional model is developed for the thermal treatment of α -spodumene. • The model predicts accurately the retention time of α -spodumene in kilns. • The initial dissociation-diffusion stage consumes 20 % of the total energy demand. • Slow recrystallisation of γ - to β -spodumene defines the processing time. • The conversion depends precipitously on the processing temperature. Kilns consume about half of the energy necessary to operate lithium refineries and their decarbonisation requires accurate modelling of the calcination of spodumene concentrates fed to the process. This contribution applies the isoconversional methodology to investigate the kinetic parameters of the transition of α- spodumene to its high-temperature polymorph of β- spodumene, using the heat flux measurements from the differential scanning calorimetry (DSC). The normalised energy demand ( α H ), presented as a function of temperature, characterises these measurements. The activation energy E α and the product of the reaction model f α and the frequency factor A α , ( fA ) α , depend on α H . As the process involves multi-step reactions, we deploy the Friedman differential method and the accurate flexible integral method of Vyazovkin to obtain the kinetic parameters. We also modify the method of Ortega to acquire additional estimates of E α and ( fA ) α and apply the rigid integral method of Starink for comparison. The Friedman, Vyazovkin and modified methods deliver the same estimates of the kinetic parameters within their error bands. The Starink method works surprisingly well for predicting the conversion time despite the inaccuracies in the derived values of E α and ( fA ) α . This comes to pass because of the compensation effect between these parameters. The activation energy declines rapidly from around 1000 kJ mol −1 at the commencement of the heat treatment to 668 kJ mol −1 at α H = 0.22, then, decreases gently to 577 kJ mol −1 at α H = 0.98, during successive recrystallisation events. Average uncertainties in these results amount to 13 kJ mol −1 . The frequency factors fall between 58.5 (±1.0) min −1 and 51.0 (±3.2) min −1 , as computed at α H = 0.23 and 0.98, respectively. The so-called false compensation analysis reveals that the first-order reaction model (in α H ) governs the energy demand for calcination for α H ≥ 0.23, but, initially, the transformation proceeds through the dissociation-diffusion regime that is not part of the established reaction models. This regime must not be ignored in modelling the calcination of α- spodumene, as it consumes around 20 % of energy required for the transformation reactions. The results reveal significant differences in the predictions of the treatment time, by more than two orders of magnitude, from the existing kinetic models, and explain the differences by the experimental conditions to collect the data for the models. The dissociation of Si-O bonds and diffusion of Si 4+ ions out of their tetrahedral cages govern the onset of the thermal treatment of α -spodumene and account for the elevated values of the activation energy in the dissociation-diffusion regime. The two recrystallisation events are limited by the multicomponent diffusion, especially Si 4+ , in partly crystallised structure. The recrystallisation of γ - to β -spodumene defines the required retention time of concentrate particles in the kiln, to maximise the effectiveness of the subsequent recovery of lithium from the treated material. Fitting E α and ln( fA ) α to polynomials allows a convenient integration of the model equation for making predictions under any heating program. The model forecasts well the transformation of particles of α- spodumene characterised by d 80 = 315 µm, studied in additional experiments, using the X-ray powder diffraction to quantify the conversion of α -spodumene. The predictions from the isoconversional model also concur well with other conversion measurements available in the literature, within the expected variability of different spodumene concentrates.

Minerals EngineeringVol. 216
Murdoch University (AU), Charles Darwin University (AU), North Oil Company (Qatar) (QA)
Ministry of Higher Education and Scientific Research, Higher Education Research and Development Society of Australasia
Openalex Percentile: Top 21%
Thermal and Kinetic Analysis
1.05
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.