Investigation of noise characteristics of electric vibrator utilizing acoustic camera and transfer path analysis

Abstract Mechanical equipment operation frequently results in noise generation, which can raise concerns regarding quality and safety. This study focuses on electric vibrators, essential electromechanical systems, with the goal of identifying the source and transfer path of noise. To achieve this objective, an acoustic camera positioning analysis was performed to approximate the distribution and characteristics of the noise. Building upon this foundation, a thorough evaluation of the transfer path and noise contribution was conducted. Subsequently, targeted noise suppression methods were implemented based on the properties of the noise. Primary noise sources were observed to be classified into wind turbulence and mechanical vibration based on operating conditions. Time-frequency analysis revealed the presence of low-frequency signals (around 50 Hz) and intermediate-frequency signals (around the resonant frequency), corresponding to wind-induced and mechanical response noise, respectively. Leveraging the characteristics of the noise and its transfer path, passive methods (Sound-absorbing rubber and Soundproof cotton) and active method (filtered-x least mean squares algorithm) were employed. The findings of this study contribute to a better understanding of noise mechanisms and provide insights for noise emission strategies.