METAL-SUPPORTED SOLID OXIDE FUEL CELLS: SYNTHESIS AND ELECTROCHEMICAL PROPERTIES ANALYSIS USING OPTIMIZATION METHOD

Recently, metal-supported solid oxide fuel cells (MS–SOFCs) have been in the spotlight again for their design, thanks to their inexpensive materials, robustness, resistance to thermal cycling, and benefits of manufacturability. Hydrogen energy electrochemical devices, like MS–SOFCs, have a lot of potential. They are very ideal substitutes for solid oxide fuel cells (SOFCs) that utilize electrolytes or ceramic electrodes as their carrier basis, because of their greater durability, mechanical stability, heat cycle resistance, and rapid startup time. Even though MS–SOFCs have several advantages over conventional ceramic-based SOFCs, researchers are still struggling to perfect them due to issues such as selecting the appropriate metal-based material for the electrodes (anode, electrode) and comprehending how they deteriorate. This limitation might be evaded by optimizing the pore former filling and the diameter of the metallic supports (130–250[Formula: see text][Formula: see text]m). Optimization methods, such as particle swarm optimization, as well as penetration cycle numbers (1–15), as well as the impacts of fire temperatures (400–900 ∘ C), were investigated to aid in optimizing the catalyst infiltration procedure. The enhanced cell outperformed its original performance by a factor of three, reaching an ideal energy density of 0.9[Formula: see text]W cm[Formula: see text] at 700 ∘ C when powered by hydrogen. The improved cells had a 2% degradation rate per 100[Formula: see text]h at 550 ∘ C, a 4.5% degradation rate at 600 ∘ C, and a 5.5% degradation rate at 700 ∘ C. We used electrochemical impedance spectroscopy and scanning electron microscopy to look at the catalyst’s mass shipping, coarsening, and chromium poisoning.